-40%
Draft Keg Beer Tower Fan Kegerator Blower with hose and bracket - 2C782-mk1-h
$ 62.3
- Description
- Size Guide
Description
NEW - 15 CFM Fan Blower for Beer Tower - Beer must be dispensed at below 40 degrees or it turns to foam. If your tower is within 6' of your cooler a blower fan is A MUST to keep the beer lines cold. Use apx 2 to 3 " id PVC tubing and run from the bottom of your tower to your cooler. Your beer lines will run inside this PVC and into your cooler. In your cooler mount this continuous run fan blower and push the blowers attached hose inside the PVC tubing. The blower will take your coolers cold air and shoot it up to the tower keeping the beer lines cold. This avoids foam and saves money on lost foamy beer poured out. To be most effective your cooler should be kept at 35-37 degrees or cooler to pour good cold beer.Features:
* 15cfm continuous run blower motor.
* mounting bracket
* 3' of 1 -1/4" id blower hose
Installation:
Measure distance from where the blower will be mounted inside your cooler to a standard 110 outlet. Purchase and electrical extension cold a few feet longer this distance. Cut off the connection end and strip back the wires 1/2". Use wire nuts to secure the wires from the extension cord to the blowers wires.