D.I.Y. Industrial sewing Machine Lathe Servo Motor Rotary Speed Control Switch

Description

D.I.Y. Build it yourself and fit it to your custom project.
This sale is for the parts required to build a rotary speed control switch that replaces the pedal switch found on most industrial sewing servo motor controllers.
See pictures.
This is not intended for use on industrial sewing machines. This is designed for those of us using these servo motors to modify our old or inferior machines with a Vevor or Mophorn industrial servo motor and who want a better looking speed control system
Your control unit must look identical to the one in the photo or this may not work.
Tested and proven on both above brands.
You build it and install it in your housing.
Will not cause fault codes.
When you turn on the
controller
it will go through self d
iagnostics
and set at zero ready to go.
Safety feature:
If you inadvertently turn on the power with the speed control set to any speed besides stop; The motor will not run until your turn the rotary to full stop. Than self diagnostics will complete and you are ready to go.
Switch active function:
The current
Potentiometer
allows speed control in the top 5/8 of the rotation or position 11 AM to 5:30PM
Therefore the first 40% of rotation 5:30AM to 11:AM is motor stopped but ready.
Only the first 1/8 of rotation 5:30 to 6:00 is self
diagnostic
and prepare to run.
In the box:
1 potentiometer as described above.
1 wire
harness
with plug.
1
correctly
rated resistor.
1 matching knob.
1 switch position plate, (note scale on plate will not match motor speed).
Instructions on how to solder the parts
together
correctly.
Shipping:
Ships USPS ground.
Returns:
These are sold as parts. You have to build it. Therefore returns are not welcome.
Ask lots of questions:
Do not purchase under pressure. There are more available than listed.
Thank you for looking.