Coin validator / coin mech programmer - all in one for NRI G series

Description

If you are good at electronics, it is also possible to sell the kit at a lower price, which will include a wiring diagram, a description of the function, a fully assembled and tested pcb and the necessary material to complete the box and cables and how to do it.
The price it depends on what you order, because some did not want some cables or cover, or already have a power supply, so they do not need to buy another and price of course is lower, but the scope of work is higher for you and you need a soldering iron, drill and other tools. If you are interested, please write me a message via the ebay form, I will answer quickly and I will advise you with anything.
I offer for sale a new device for programming and diagnostics of all types and designs coin validators "G" series manufactured by NRI.
This device successfully
tested with
all types and designs of "G" series coin validators from 1990 to the last types up to the year of production 2021.
Supported
and successfully tested and programmed
types of validators by offered set:
- G-10
- G-13
- G-18
- G-26
- G-40
- G-46
- E-66
You don't need anything except this device set and your PC with Windows OS 2000, XP, Vista, 7 or higher with RS232-COM1 serial port or USB connection to repair and programming your G series coin validators.
The offered set with mentioned price contains:
- Communication interface box
- USB to RS232 converter with drivers for Windows (used with PCs that do not have a COM connector (serial port)) so only have a USB connector.
- Universal power supply from the mains 100V - 240V AC 50Hz - 60Hz for powering of tested coin validator and communication interface box + power cable with EURO terminal (if you need to connect a power supply outside the EU, you need to notify me, because you need other plug cable).
- The communication interface box has protection against the opposite polarity of the power supply in case use of non-original power supply (recommended power supply is 12-16V DC 2-5A), also is contain a short-circuit protection for validator powering (polyswitch fuse 1A) and the box also contains overvoltage protection of data inputs and outputs on the validator connector side.
- Cabling for connection for all types of "G" series coin validators,
so now 3 types of cabling:
First cabling - 4 hole communication connector JST type and togheter with 10 hole bus and power connector (2x5 holes type witch 2,54mm pitch) for oldest G-13 and other oldest validators.
Second cabling - 10 contacts slot connector (2x5 spring contacts) for newest G-13, G-40, G-46, E-66 validators.
Thirt cabling - 6 hole JST type connector with aditional interface module on cable for G-10, G-26 and G-18 validators
The functions of the programs on PC are not limited, so it is possible to do everything that each program has to offer eg.:
- diagnostics of all sensors of the tested coin validator on validators from the year of manufacture 2000 and higher (LS, CP and others used in particullar type of coin validator).
- Change - reprogramming of output channels of the all types "G" series of coin validators.
- Change - reprogramming of coins or tokens (adding other coins or any metal token or removing the old coins from validator memory) of all types "G" series of coin validators.
- In case of incorrect setting, it is possible to return to the original setting using the "RESTORE" menu.
- Change of channel setting parameters.
- Enabling or disabling unauthorized access lock VDAI / ACMI.
They use some authorized services so that no one else can change the programming, but someone can still do it :-)
- Enabling or disabling any channel.
- Enabling or disabling teach mode and
setting which channel can be used in teach mode.
.
- Saving coin validators settings to a file on PC disk and write this settings back to validator in the future.
-
Specifically on the G-13mft types can change of "device variant" to change from casino type to vending type and vice versa.
-
Change of coin slot number where going particullar coin type after acceprinh to coin changer and additional functions related to types G-26 and G-46, which are used together with coin changers.
- Verification of sw and hw version, checksum, date of manufacture and date of last change of settings of the connected validator.
- Copy channel settings and swap them
- For the G-13mft and G-46.4XXX, display the range of parameters of individual coins types and current inserted coin and compare these parameters for the needs of coin producers and collectors and verify counterfeits.
- Change of data block to another, which already contains all specific settings and types of coins
- Output bus and sorting solenoids test of connected coin validator
-
The connected G-46 also allows testing of the tube coin dispenser - coin payer from tubes dispensing test, checking the minimum level of coins in the tubes and reset state of tubes level.
Here is the presentation video with testing a programming of G-13 four types from oldest to newest and G40:
https://youtu.be/_flnsbej9QQ
If you have any questions, please write a message in the ebay form.
Shipment is as package with
insurance
and tracking number w
ithin the EU 2 to 14 working days.